QUALIFICATIONS STARTUPS AND TRYOUTS 2nd edition

The truth is you don’t need fancy gizmos to do scientific molding.  All you need is a machine where you can read the settings, an accurate weigh scale, and a computer.  A universal setup guide only needs a little homework on your part to read each machine’s manual and the ability to read the settings.  If you’d like, you can pay $1250 to get a Universal Setup Guide and Viscosity Curve calculator. But you would have spent $1220 too much for the same information you can get here.  If you had a few days and an engineering textbook you could actually write these yourself!  It is NOT MAGIC.

Qualifications Startups and Tryouts  2nd edition is a book with an accompanying CD.  The CD contains both filled in tutorials showing what inputs are required and worksheets for you to fill in.

CD Contents:

  Spreadsheets in Microsoft Excel .xls files
Optimum fill calculation – the melt viscosity curve
Gate Freeze off
Cooling time
Cavity balance for multi cavity tools
Cp CpK calculator
Universal setup sheet – includes how to translate from one machine to another and a waterline map.
Runner size optimization

  Microsoft Word .doc Files:

Mold Check List
Mold History/Maintenance forms
The text includes a complete explanation of the experiments to optimize your injection molding cycle.

Other Topics are:

Mold Maintenance – Inspection and General Maintenance
Mold hang and Mold Pull procedures
Mold Storage
Basic Chemistry
Quality Control/ Quality Assurance – Cp and CpK explained and how to use them
 Sizing Sprues, Nozzles and Runners for your mold
Hard Copy of the Mold Check List, Mold History and a Data Form to fill out for the experiments.



Here’s what one company said:

As far as the books go I can sum up my thoughts in one word. WOW! Finally someone who takes a no B.S. approach to molding. A little bit of knowledge can do a lot of people some good.   -- Rick Puglielli, President, Promold Plastics, Cromwell, CT 06416, www.promoldplastics.com
 
 

Qualifications Startups and Tryouts 2nd edition
Item # 223.1 Price $30.00 USD + $5.00 P&H
ORDER on-line (all credit cards through PAYPAL)
   www.wjtassociates.com   - Publications

Purchase orders:
WJT Associates
PO Box 597
Louisville, CO  80027
FAX:  303 604 0319
Questions?
Call: 303 604 9592
Shipment will be Priority Mail, usually within one week of receipt of order.
Orders will be invoiced.
Terms are n-30.