SOCIETY OF PLASTICS ENGINEERS
GOLDEN GATE SECTION
VIDEO LENDING LIBRARY

last updated: 7/16/2003

Phone: 831-464-1111
Fax: 831-464-1100

Contact: Michael LoDico
e-mail: postmaster@spe-ggs.org
 

The following videos are available for viewing to educational facilities at NO COST.
At the time of check-out a deposit is required for the full amount of the video.
The deposit will be returned when the video is returned in good condition.
Due to the high demand, please plan early and return the video in a timely manner.
 

1. INTRODUCTION TO INJECTION MOLDING

This package consists of 4 videos with the following titles:
Introduction to Injection Molding, Mold Set-up, Putting the Machine on
Cycle, and Quality Assurance. These videos come with workbooks and a
Leaders guide.

Check-out Cost: $200.00 each. TIME: 97 minutes.
 

2. EXTRUDER PRIMER FULL VIDEO

Objectives of this program include identifying the major
parts of the extruder, knowing the functions these parts play, learning
the basic steps in the extruder start-up and shutdown, understanding
how material are processed and identifying problems.

Check-out Cost: $450.00
 

3. BASIC EXTRUDER PROBLEMS & SOLUTIONS

This video will help machine operators solve problems and
become more efficient with the equipment.

Check-out Cost: $475.00
 

4. AMERICAN PLASTICS COUNCIL: THE BUSY, BUSY PLANET

This video is about plastics and resource conservation for students,
teachers, or anyone interested in saving resources on our busy, busy planet.

Check-out Cost: $25.00 TIME: 11:00 minutes
 

5. UNDERSTANDING PLASTICS

Introduction to a basic understanding of plastics

Check-out Cost: $25.00 TIME: 29:30 minutes
 

6. PLASTICS VIDEO OUTREACH

This video contains two great sections: Not Your Average
Field Trip and Plastics: The World of Imagination. Ideal for students
from Junior High and higher.

Check-out Cost: $25.00 TIME: 50:30 minutes
 

7. PEP TRAINING VIDEO

This video shows a typical training lesson on the Plastics Education Program (PEP),
a program for teaching 4th through 8th graders about plastics by lab demonstrations.
Sponsored by The Society of Plastics Industry

Check-out Cost: $25.00 TOME: 10 minutes
 

8. THE LOWELL MODEL

A look at UMass Lowell's community involvement programs in Lowell, Massachusetts

Check-out Cost: $25.00 Time: 11:30 minutes
 

9. REAL LEARNING, REAL WORK, REAL WORLD

Another video sponsored by UMass Lowell's Engineering College
which includes the Lowell Plastics Program

Check-out Cost: $25.00 TIME: 12 minutes
 

10. SPI COMMUNITY INVOLVEMENT

A look at how to develop a company sponsored Community
Involvement Program, sponsored by the SPI

Check-out Cost: $25.00 TIME: 10:30 minutes
 

11. CAL STATE UNIVERSITY AT CHICO

A look at the Cal State Chico Engineering programs,
titled: "Up To Chico"

Check-out Cost: $25.00 TIME: 11 minutes
 

12. APPRENTICESHIPS: CALIFORNIA DEPT. OF INDUSTRIAL RELATIONS

A video highlighting the California Apprenticeship programs available
from the state for implementation by companies and trade associations

Check-out Cost: $25.00 TIME: 10 minutes
 

13. PLASTICS PART DESIGN 10-set "Classroom style" Video Series

The Plastic Part Design Series provides part designers with an understanding of the plastic
part design process with many factors and concerns associated with proper plastics part
design. Dr. Robert Mallory, a professor at UMass Lowell developed this series.

Each video is about one hour in length.

(VIDEO 1) Basic Steps in Plastic Product Design
Check out Cost: $422.00

(VIDEO 2) Mechanical Behavior of Plastic Materials
Check out Cost: $422.00

(VIDEO 3) Manufacturing Considerations
Check out Cost: $422.00

(VIDEO 4) Manufacturing Considerations -Weld Lines
Check out Cost: $422.00

(VIDEO 5) Manufacturing Considerations -Shrinkage and Warpage
Check out Cost: $422.00

(VIDEO 6) Manufacturing Considerations -Part Ejection
Check out Cost: $422.00

(VIDEO 7) Prototyping Techniques of Plastic Parts
Check out Cost: $422.00

(VIDEO 8) Assembly of Plastic Parts: Mechanical Fasteners
Check out Cost: $422.00

(VIDEO 9) Assembly of Plastic parts: Press Fits & Snap Fits
Check out Cost: $422.00

(VIDEO 10) Assembly of Plastic Parts: Welding & Adhesive Bonding
Check out Cost: $422.00
 

15. The ResinKit

By The Plastics Group, 1988, 50 plastic samples, plus 41 pages. This notebook
binder contains a comprehensive selection of specially molded test chips. This is
a practical guide for researchers, educators, designers and students. The kit
contains technical data on each plastic, including mechanical and thermal properties.

Check out Cost: $180.00
 

** Reminder: Check-out Cost is totally refundable upon video return **
 
 

Check with us often, we are always looking for donations of video material
and your contributions may be tax-deductible. We update this Library often
so call or email us for the latest available videos.